ใบเลื่อยตัดเหล็ก(Industrial power/machine Saw Blades model KEN-040

รหัสสินค้า : 000085

ยี่ห้อ : 

รุ่น : 

สภาพสินค้า : สินค้ามือใหม่

_____________________________

Designed for use across a wide range of ferrous and non-ferrous materials.

18 Teeth per Inch

Recommended for cutting thin cross-sections. such as tubing. smalll bars and light angle iron.Because blades are relatively thin they should be used only on light machines.

10-14 Teeth Per Inch

Recommended for cutting small cross sections and hard stock. This is the most popular choice for machine shops that are cutting a wide variety of materials.

4-6 Teeth Per Inch

Recommended for cutting large sections of softer ferrous metals , most alloy steels and all non-ferrous metals.The increased gullet clearance is able to handle heavy chips without clogging.

Operating Recommendations

Lower speeds and hihger feed give best results. Ensure that the machine lifts the blade slightly on the return stroke. Exact speed and feed for each job can be established only from tests. The table below is to be used for guidance only.

When matching a section thickness aganst a suitable Blade TPI there are usually a number of blade options - Use coarse pitches(less TPI) for faster cutting and finer pitches(more TPI) for better surface finishes.